Advisory message
Can also leave a message to us, we will be the first time to contact you!
Electric film winder adjustment steps
Time:
2021-11-12
The drive shaft of the greenhouse film coil can be rotated about 50 turns (about 9 minutes), and the film width is about 4m when the 25mm film coil tube is used. 1. Fix the greenhouse film roll device in the middle position of the film expansion, turn on the power to make the motor run, and change the motor steering several times to test whether the motor works normally.
The drive shaft of the greenhouse film coil can be rotated about 50 turns (about 9 minutes), and the film width is about 4m when the 25mm film coil tube is used.
1. Fix the greenhouse film roll device in the middle position of the film expansion, turn on the power to make the motor run, and change the motor steering several times to test whether the motor works normally.
2, the greenhouse film roll device drive shaft can be rotated about 50 turns (about 9 minutes), when using 25mm film roll tube, the film width is about 4m.
3. The limit switch part of the greenhouse film coil is shown in the figure. Both A and B are set to 0 when the product is delivered. When the 25mm film coil tube is used as the driving shaft, the film height of each large scale film coil tube is about 0.2m, and the film height of each five scale film coil tube is about 1m.
4, adjust the limit switch first slightly press the adjustment knob A, B, slightly rotate the adjustment knob A, B, according to the actual need of the film width, rotate to the appropriate scale.
5. After the limit switch is adjusted, run it repeatedly several times to test whether the limit switch works normally and adjust it to a good working state.
6. Please do not change the limit switch once it is adjusted.
Related information